Dobber
Member
I like those. Thanks for the link. I’ll order a set of those for the fronts. We rarely have passengers as well.
-
🔖 It looks like you are browsing the site as a guest. By registering on the site you can participate on the Internet's largest Polaris Ranger XD 1500 forum. To register, simply Click Here!
What’s New with Your Ranger XD this week? 🛠️
- Thread starter supersix
- Start date
I like those. Thanks for the link. I’ll order a set of those for the fronts. We rarely have passengers as well.
Mr.C
Well-known member
Your welcome.
Just finished installing the JRI Mid Travel on our XD 1500. Gotta say, these are a work of art!
The design appears to be very strong, with lots of gussets at all the obvious stress points. But they’re all rounded edges and sleek styling. They also have greaseable bushings, and come with a tip-to-tip tie rod replacement, rather than just an extension.
The design appears to be very strong, with lots of gussets at all the obvious stress points. But they’re all rounded edges and sleek styling. They also have greaseable bushings, and come with a tip-to-tip tie rod replacement, rather than just an extension.
LowlyOilBurner
Member
Here’s my little write up about it:I’m sure that set up will be great. Look forward to hearing your feedback and thoughts on the UTV subwoofer kit.
Kit is great, well worth the money, and I bought the “cheap” kit.
Dobber
Member
Those bumpers look so tough!
Dobber
Member
Window tint got done today. Now to just get the headache rack on and wait on some
Razorback accessories to show up.
Before and after pics.
Razorback accessories to show up.
Before and after pics.
Mr.C
Well-known member
Looks good! I still need to get mine in for window tint. They look so much better.
Dobber
Member
I think so too.
Dobber
Member
25% on sides and back, 50% in the front. We do a lot of night time riding on the roads and some trails as it’s legal in our county. I didn’t want the front to dark for visibility. The tint helps temendrously with the heat during summer. Also, this is what we had on our last 1500 and other ranger northstars, and it worked great for us.
Mr.C
Well-known member
I feel the same, I do a lot of driving in the dark in early mornings and late nights. So I’m skipping the windshield altogether. Just gonna do 20% on sides and back window. That way when I’m having to reverse for a half mile down a dead end road, I can still kind of see. Plus I use mine for hunting, even though I’m not a road hunter. I like to see well enough out the windows in case I see game.
LowlyOilBurner
Member
On my 2dr, did 20% all the way around, sans the windshield. Left that untouched. Looks great still, I think it looks better darked out than my Xpedition did with 20% all the way around. Did it myself, came out pretty good, minus some chocolate lab hair probably in a couple spots. Used autozone GILA ceramic at $27.00 a roll. Took two rolls.
Big Red
Well-known member
Looks great, I wish I could do mine that way. I have a 2 door and in Iowa the only thing that is legal to tint is the back windows of a 4 door and the rear window, so that just leaves me the rear window. I often times have a refreshment in my Ranger and the last thing I want to do is talk to the Po Po about how dark my windows are.
Dobber
Member
I put the headache rack on today and got the AJK off road underseat storage box I ordered put on this am.
I used heavy duty Velcro after cleaning everything good with alcohol and dried it and attached it so it can be easily removed if needed. I have done this with a Polaris underseat storage box that we had on our 1000xp crew that will not fit under the seat on a 1500XD with good results.
I say I’m done, and then I see something else someone has done here and then I hit the order button. Wife is going to kill me one of these days
.
I also saw Big Red here, I think if memory serves me correctly, had some plugs at the back of his beside the hitch he had ordered from Amazon, but was no longer in stock. I ordered as close as to the size as I could get off Amazon knowing I would have to trim them down.
I cut the ribs off with a utility knife on 3 sides carefully, and popped it right in. Tight enough they will not come out, but will pop out if needed.
Still waiting on more stuff to show up.
I used heavy duty Velcro after cleaning everything good with alcohol and dried it and attached it so it can be easily removed if needed. I have done this with a Polaris underseat storage box that we had on our 1000xp crew that will not fit under the seat on a 1500XD with good results.
I say I’m done, and then I see something else someone has done here and then I hit the order button. Wife is going to kill me one of these days
.I also saw Big Red here, I think if memory serves me correctly, had some plugs at the back of his beside the hitch he had ordered from Amazon, but was no longer in stock. I ordered as close as to the size as I could get off Amazon knowing I would have to trim them down.
I cut the ribs off with a utility knife on 3 sides carefully, and popped it right in. Tight enough they will not come out, but will pop out if needed.
Still waiting on more stuff to show up.
Mr.C
Well-known member
Looking good. I need to order the plugs as well. I usually wait until I have a long enough list for Amazon before I make an order.
Lil red 02
Member
Link for the plugs pretty please?
Are you selling those?
Dobber
Member
You will have to trim the ribs down for them to go in. I used a utility knife and was careful. They were as close a fit as I could find. The ones Big Red used are out of stock on Amazon. Was not a hard thing to do.
📸 Ranger XD Forum Photos
📸 Ranger XD Forum Photos
